Ceramic One Step Polish 16 oz TEC581

The first polish to contain ceramic surface material. The polish can be used as a standalone or as an excellent choice for preparing any vehicle’s surface for a ceramic coating or detailer application. Ceramic polish contains fine milled polishing agents to give a consistent cut throughout the buffing cycle | while ceramic material is deposited into the pores of the clear coat. This is perfect for light cutting of new & used vehicles. The ceramic material deposited acts as a base layer for additional ceramic application | either liquid or spray. The base layer works synergistically with either the liquid or spray | so there is no need to have an additional prep step prior to additional ceramic application.

DIRECTIONS: Wash and dry vehicle. Clay bar vehicle if needed. Shake product well. Product can be applied by hand or machine. For best results | apply four small sized drops onto a primed finishing pad. Work a 2’x 2′ section at a time. Use a slow back and forth motion until product begins to break down. Wipe off residue with microfiber towel. For easier removal | use a few sprays of your preferred ceramic detail spray. Severely neglected finishes may need a second application to remove surface defects.

FEATURES:

• Prepares the surface for ceramic application
• Cleans | shines & adds base ceramic to finishes
• Fine milled polishing agents
• Easy wipe off & no dusting
• Tight water beading